Teradek Antenna Array for Bolt Rx Including a Mounting Bracket and Protective Case (The Array offers a more resilient wireless transmission, especially in challenging RF conditions, but it will NOT increase range)
- 5.1-5.8 GHz MIMO Panel Antenna
- Enhances Wireless Video Transmission
- Focuses Signal and Reduces Interference
- 3x16 dBi / 2x14 dBi Antenna Array
- Waterproof Carrying Case Included
Overview
The Panel Array Antenna is your go-to solution for cutting through wireless interference in crowded environments. When attached to a Bolt 1000 or 3000, the antenna provides an extremely robust directional signal that will ensure your signal arrives uninterrupted.
Comes with the Teradek Antenna Array and a Protective SKB Case with custom foam. The custom foam was designed to accommodate the Antenna Array, 1 Bolt Transmitter and up to 2 Bolt Receivers.
The Teradek Array is a 5GHz MIMO panel antenna designed for use with Beam, Bolt 600, 1000, 2000, 3000 Receivers (Bolt Transmitters, Bolt 300 and Sidekick are not supported). The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. As a result, you may achieve a boost in the reception range but it will not be above the maximum range.
Features
- Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)
- Composed of 3x16 dBi and 2x14 dBi antennas using 5.1-5.8 GHz MIMO
- Small, Lightweight and made from UV-protected plastic with aluminum alloy
- or -
Watch NEBTEK's Bolt 3000 Range Test
Teradek Protective Case
Features
- Waterproof and dust tight design
- Molded-in hinge for added protection
- Trigger release latch system
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve
- Resistant to UV, solvents, corrosion, fungus
- Resistant to impact damage
Technical Specifications
Wireless -
Frequency Range
- 5.1 - 5.8 GHz
Gain
- 14 and 16dBi
Protocol Support
- 802.11n MIMO standard
Polarization
- dual H&V
Beamwidth Deg Horizontal
- 38°
Beamwidth Deg Vertical
- 38°
Vswr
- <1,8
Impedence
- 50 ohm
Front To Back Ratio
- > 35 dB
Physical -
Dimensions
- 13.78 x 13.78 x 1.25 in (35 x 35 x 3.18 cm)
Material
- UV-protected plastic with aluminum alloy (construction grade)
Weight
- 2.45 lbs
Connectors
- RP-SMA
Min Temperature
- -40°F (-40°C)
Max Temperature
- 176°F (80°C)
Color
- Black