RED 9-Pin EXT-to-Flying Lead Cable 3.3cm (1.3 inches)
Designed for advanced KOMODO® users, the RED® 9-Pin EXT-to-Flying Lead Cable (1.3ft/ 15.6in) breaks out to any of the functions of the EXT port including: Timecode In/Out, GPI/ GPO, Genlock, RS-232 TX/RX & 5v Aux (500 ma Max) allowing users to create custom cables.
NOTE: Timecode-out (Pin 2) is not currently supported on KOMODO.
NOTE: RED 9-Pin EXT-to-Flying Lead Cable is not compatible with DSMC®, DSMC2®, or RED RANGER®.
|1||5 V AUX||5 Volt AUX (500 mA Max) enabled using the Power menu|
|2||Timecode Out||Timecode Out – SMPTE 12M1|
|3||GPO||General Purpose Out, Tally or Sync, 3.3 Volt Logic Level1|
|4||UART TX||RS-232 Transmit|
|5||UART RX||RS-232 Receive|
|6||GPI||General Purpose In, 3.3 Volt Logic Level2|
|7||Timecode In||Timecode In – SMPTE 12M|
|8||Genlock||Tri-Level Genlock In (SMPTE 296M and 274M)|
|9||GND||Signal and Power Ground|
1. Not currently supported
2. The signal path includes a resistor pulling the signal high, which is designed to work with a closure switch connected to GND.