Lightpro L-2800FP 2.8m Air-Cushioned Light Stand - Uncompromised Payload Protection
A heavy-duty, pneumatically dampened aluminum support system engineered to securely elevate continuous lighting and strobes while protecting sensitive fixtures from catastrophic impact.
Built for the Demands of Modern Production
On fast-paced sets, grip equipment must deliver unwavering stability and rapid adjustability without putting vital lighting fixtures at risk. The Lightpro L-2800FP addresses the critical safety demands of location and studio shooting with its integrated pneumatic air-cushioning system. Unlike standard friction-lock stands, the L-2800FP's internal air dampening heavily decelerates the descent of the center columns if a section is prematurely unlocked. This prevents high-value COB LEDs, studio strobes, and heavy modifiers from slamming downward, eliminating the risk of impact damage to the fixture's filament, LED chip, or the grip's hands.
Constructed from high-tensile, lightweight aluminum alloy, this 4-section stand balances rigorous torsional rigidity with location-friendly portability. Offering a maximum working height of 280 centimeters, it easily clears the eyeline for elevated key lights and hair lights. The wide 104-centimeter footprint guarantees an optimized center-of-gravity distribution, minimizing sway when flying larger softboxes or parabolic umbrellas. Its payload capacity sustains 3kg at maximum vertical extension, with dynamic load tolerances increasing up to 5kg when the column sections are nested and the base is properly sandbagged.
Featuring quick-release, sure-twist section compression locks, the L-2800FP allows for rapid height adjustments during time-sensitive setups. The dual-sided 5/8-inch baby pin receiver provides versatile mounting options, including 90-degree lateral spigot orientation, ensuring compatibility with standard yoke mounts and precision light-shaping accessories across the grip truck.
Key Technical Specifications
-
Maximum Working Height: 2800mm (2.8m / 9.2 ft)
-
Minimum Working Height: 960mm (96cm / 3.15 ft)
-
Folded Length: 835mm (83.5cm / 32.8 in)
-
Payload Capacity: 3kg (6.6 lbs) at maximum extension; up to ~5kg (11 lbs) when partially extended
-
Construction Material: High-tensile aluminum alloy
-
Section Count: 4-tier telescopic center column
-
Tube Diameters: 19mm, 22.4mm, 26mm, 29.5mm
-
Footprint Diameter: 104cm (41 in) for optimized stability
-
Dampening System: Integrated pneumatic air-cushioning across 3 vertical sections
-
Mounting Standard: Removable 5/8" Baby Pin spigot with 1/4"-20 and 3/8"-16 threaded mounts
-
Spigot Orientation: Top-mount vertical and 90-degree lateral slotting supported
-
Locking Mechanism: Sure-twist compression collars
-
Net Weight: 1.95kg (4.3 lbs)
Production FAQ
Does the air-cushioning affect the speed of striking the set?
The pneumatic air-cushioning requires a slight downward pressure to compress the air when packing down the stand, adding only a few seconds to the strike process but completely eliminating the risk of internal column slamming.
Can this stand securely fly a 300W LED monolight with a large parabolic softbox?
Yes, provided the height is kept moderate. While the stand is rated for a 3kg payload at full 2.8m extension, a heavier 300W COB LED with a large modifier should be flown lower to utilize the 5kg nested rating and secured with heavy sandbags to prevent wind-shear or toppling.
Is the 5/8-inch baby pin fixed or removable for lateral mounting?
The 5/8-inch spigot is fully removable and reversible, featuring a multi-directional receiver block that allows the pin to be slotted in vertically or at a 90-degree lateral angle for advanced rigging scenarios.