APPLICATION GUIDE

SURFACE PREPARATION
New paper-faced wallboard, hardboard, new plaster, fibrous plaster, cement bricks: Brush down with a stiff fibre brush to remove loose and powdery material. Fill cracks with filler, sand and dust down. Apply one coat of Permaplastik Acrylic Sealer Undercoat. Stir well before use with a broad flat paddle.
Previously painted surfaces: Scrape loose and flaking paint off, sand smooth and dust down. On greasy or dirty surfaces wash with sugar soap.

FINISHING
Apply one or two coats of Permaplastik as required. For optimum results White Permaplastik Acrylic Sealer Undercoat should be used before coating with any Permaplastik colour.

THINNING
Not usually required. On very absorbent surfaces (e.g. set plaster), dampen the surface and thin the first coat with up to 100mL of water per litre.

DRYING TIMES
At approximately 25°C, 30 minutes to touch-dry; 4 hours – dry to recoat. Under cooler or humid conditions allow longer times. Note: Do not use at temperatures below 10°C.

Building Your Own Studio from Dragon Image on Vimeo.

SAFTEY DATA SHEET 213 WHITE SCENERY PAINT

Issue Date 4-March- 2016 Revision Date 4-March--2016 Version 1 Section 1: PRODUCT IDENTIFIER AND CHEMICAL IDENTITY Product identifier Product Name 213 WHITE Other means of identification Recommended use of the chemical and restrictions on use Recommended Use Recommended for Industrial and/or Professional use only Details of manufacturer or importer For further information, please contact Contact Point +61 (02) 9436 0259 E-mail address barpaint@bigpond.com Emergency telephone number Emergency telephone number +61 02 9436 0259 Section 2: HAZARD(S) IDENTIFICATION Not classified as dangerous goods in accordance with the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG) Classified as a hazardous substance in accordance with the criteria of Safe Work Australia - Globally Harmonised System (GHS) GHS Classification Serious eye damage/eye irritation Category 2A - (H319) Skin sensitisation Category 1 - (H317) Label elements

Signal word Warning Hazard statements H319 - Causes serious eye irritation H317 - May cause an allergic skin reaction Precautionary Statements - Prevention Wash face, hands and any exposed skin thoroughly after handling Wear protective gloves/protective clothing/eye protection/face protection Avoid breathing dust/fume/gas/mist/vapours/spray Contaminated work clothing should not be allowed out of the workplace Manufacturer Barham Manufacturing Pty Ltd 7 Campbell Street Artarmon, NSW 2064 Precautionary Statements - Response Specific treatment (see supplemental first aid instructions on this label) IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention

Product Name: 213 WHITE Version 1.0 Page 1 of 7 Issued: 13/02/2019

BARHAM MANUFACTURING PTY LTD

A.C.N. 000 590 036

7 Campbell Street Artarmon NSW 2064 P.O. Box 113, Artarmon NSW 1570 Telephone: 02 9436 0259 Facsimile: 02 9438 1882 Email: barpaint@bigpond.com

IF ON SKIN: Wash with plenty of soap and water If skin irritation or rash occurs: Get medical advice/attention Wash contaminated clothing before re-use Precautionary Statements - Disposal Dispose of contents/container to an approved waste disposal plant Other hazards No hazard identified Section 3: COMPOSITION/INFORMATION ON INGREDIENTS Substance Not applicable Mixture Chemical Name CAS No Weight-% Sodium nonyl phenol ethoxylate sulfate 9014-90-8 1-<3 Methyl Methacrylate 80-62-6 <0.3 2-Ethylhexyl acrylate 103-11-7 <0.3 Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one [EC no.247-500-7] and 2-methyl-4-isothiazolin-3-one [EC no. 220-239-6] (3:1)] 55965-84-9 <0.1 Information on Composition The 3:1 mixture of 5-Chloro-2-methyl-4-isothiazolin-3-one and 2-Methyl-4-isothiazolin-3-one is also covered by CAS number 55965-84-9 (EC No. 220-239-6). Chemical Name % 5-Chloro-2-methyl-4-isothiazolin-3-one 'CAS #:' 26172-55-4 0-<0.45% 2-Methyl-3-isothiazolone 'CAS #:' 2682-20-4 0-<0.15% Section 4: FIRST AID MEASURES Description of first aid measures General advice Show this safety data sheet to the doctor in attendance. Emergency telephone number Poisons Information Centre, Australia: 13 11 26 Inhalation Remove to fresh air. Skin contact Wash with soap and water. May cause an allergic skin reaction. In the case of skin irritation or allergic reactions see a doctor. Get medical attention if irritation develops and persists. Eye contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area. Get medical attention if irritation develops and persists. Ingestion Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a doctor. Self-protection of the first aider Avoid contact with skin, eyes or clothing. Wear personal protective clothing (see section 8). Most important symptoms and effects, both acute and delayed Symptoms Itching. Rashes. Hives. Burning sensation. Indication of any immediate medical attention and special treatment needed Note to doctors May cause sensitisation in susceptible persons. Treat symptomatically. Section 5: FIRE FIGHTING MEASURES Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Unsuitable extinguishing media Do not use water jetstream Specific hazards arising from the chemical

Product Name: 213 WHITE Version 1.0 Page 2 of 7 Issued: 13/02/2019

BARHAM MANUFACTURING PTY LTD

A.C.N. 000 590 036

7 Campbell Street Artarmon NSW 2064 P.O. Box 113, Artarmon NSW 1570 Telephone: 02 9436 0259 Facsimile: 02 9438 1882 Email: barpaint@bigpond.com

In the event of fire and/or explosion do not breathe fumes. May cause sensitisation by inhalation and skin contact. Thermal decomposition can lead to release of irritating and toxic gases and vapours. Product is or contains a sensitiser. May cause sensitisation by skin contact. Special protective actions for fire-fighters Wear self-contained breathing apparatus and protective suit. Use personal protective equipment as required. Section 6: ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal precautions Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal protective equipment as required. Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Refer to protective measures listed in Sections 7 and 8. For emergency responders Use personal protection recommended in Section 8. Environmental precautions Collect spillage. Methods and material for containment and cleaning up Methods for containment Prevent further leakage or spillage if safe to do so. Methods for cleaning up Take up mechanically, placing in appropriate containers for disposal. Precautions to prevent secondary hazards Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations. Reference to other sections See section 8 for more information. See section 13 for more information. Section 7: HANDLING AND STORAGE Precautions for safe handling Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Do not eat, drink or smoke when using this product. Take off contaminated clothing and wash before re-use. General Hygiene Considerations When using do not eat, drink or smoke. Wash contaminated clothing before re-use. Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat, drink or smoke when using this product. Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up. Keep out of the reach of children. Keep from freezing. Incompatible materials None known based on information supplied. Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Exposure Limits . This product, as supplied, contains hazardous materials with occupational exposure limits. Chemical Name Australia Methyl Methacrylate 80-62-6 50 ppm TWA 208 mg/m3 TWA 100 ppm STEL

Product Name: 213 WHITE Version 1.0 Page 3 of 7 Issued: 13/02/2019

BARHAM MANUFACTURING PTY LTD

A.C.N. 000 590 036

7 Campbell Street Artarmon NSW 2064 P.O. Box 113, Artarmon NSW 1570 Telephone: 02 9436 0259 Facsimile: 02 9438 1882 Email: barpaint@bigpond.com

416 mg/m3 STEL Appropriate engineering controls Engineering Controls Ensure adequate ventilation, especially in confined areas. Individual protection measures, such as personal protective equipment Eye/face protection Tight sealing safety goggles. Skin and body protection Suitable protective clothing. Respiratory protection Where respiratory protection is required, use a respirator selected and in accordance with AS/NZS 1715 and AS/NZS 1716. Environmental exposure controls Do not allow into any sewer, on the ground or into any body of water. Section 9: PHYSICAL AND CHEMICAL PROPERTIES Physical state liquid Appearance No information available Colour White Odour Slight ammonia odour Odour threshold No information available Explosive properties No information available Oxidising properties No information available Other Information VOC Content (%) No information available Density No information available * This information may be derived from the components in the preparation. Section 10: STABILITY AND REACTIVITY Reactivity Chemical stability Stable under normal conditions. Explosion data Sensitivity to Mechanical Impact None. Sensitivity to Static Discharge None. Possibility of Hazardous Reactions None under normal processing. Conditions to avoid Incompatible materials No information available. Hazardous Decomposition Products Property Values Remarks • Method pH No information available Melting point / freezing point No information available Boiling point / boiling range No information available Flash point No information available No information available Evaporation rate No information available Flammability (solid, gas) No information available Flammability Limit in Air Upper flammability limit: No information available Lower flammability limit: No information available Vapour pressure No information available Vapour density No information available Relative density No information available Water solubility No information available Solubility(ies) - No information available Partition coefficient No information available Autoignition temperature No information available Decomposition temperature No information available Kinematic viscosity No information available Dynamic viscosity No information available Section 11: TOXICOLOGICAL INFORMATION Acute toxicity

Product Name: 213 WHITE Version 1.0 Page 4 of 7 Issued: 13/02/2019

BARHAM MANUFACTURING PTY LTD

A.C.N. 000 590 036

7 Campbell Street Artarmon NSW 2064 P.O. Box 113, Artarmon NSW 1570 Telephone: 02 9436 0259 Facsimile: 02 9438 1882 Email: barpaint@bigpond.com

Information on likely routes of exposure Product Information . Inhalation Specific test data for the substance or mixture is not available. May cause irritation of respiratory tract. Eye contact Specific test data for the substance or mixture is not available. Causes serious eye irritation. (based on components). May cause redness, itching, and pain. Skin contact Specific test data for the substance or mixture is not available. Prolonged contact may cause redness and irritation. May cause irritation. May cause sensitisation by skin contact. Repeated or prolonged skin contact may cause allergic reactions with susceptible persons. (based on components). Ingestion Specific test data for the substance or mixture is not available. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea. Numerical measures of toxicity - Product Information 0% of the mixture consists of ingredient(s) of unknown toxicity Chemical Name Oral LD50 Dermal LD50 Inhalation LC50 Sodium nonyl phenol ethoxylate sulfate = 10 g/kg ( Rat ) - - Methyl Methacrylate = 7900 mg/kg ( Rat ) = 7872 mg/kg ( Rat ) - = 4632 ppm ( Rat ) 4 h 2-Ethylhexyl acrylate = 4435 mg/kg ( Rat ) = 7522 mg/kg ( Rabbit ) - Mixture of 5-chloro-2-methyl-4-isothiazolin- 3-one [EC no.247-500-7] and 2-methyl-4-isothiazolin-3-one [EC no. 220-239-6] (3:1)] = 53 mg/kg ( Rat ) - - See section 16 for terms and abbreviations Delayed and immediate effects as well as chronic effects from short and long-term exposure Skin corrosion/irritation May cause skin irritation. Serious eye damage/eye irritation Classification based on individual ingredients of the mixture. Irritating to eyes. Sensitisation May cause sensitisation by skin contact. Germ cell mutagenicity No information available. Carcinogenicity . Reproductive toxicity No information available. STOT - repeated exposure No information available. Aspiration hazard No information available. Section 12: ECOLOGICAL INFORMATION Ecotoxicity Unknown Aquatic Toxicity 1.0308817% of the mixture consists of components(s) of unknown hazards to the aquatic environment Chemical Name Fish Methyl Methacrylate 243 - 275 mg/L LC50 96 h Pimephales promelas flow-through 79 mg/L LC50 96 h Oncorhynchus mykiss static 170 - 206 mg/L LC50 96 h Lepomis macrochirus flow-through 79 mg/L LC50 96 h Oncorhynchus mykiss flow-through 125.5 - 190.7 mg/L LC50 96 h Pimephales promelas static 326.4 - 426.9 mg/L LC50 96 h Poecilia reticulata static

Product Name: 213 WHITE Version 1.0 Page 5 of 7 Issued: 13/02/2019

BARHAM MANUFACTURING PTY LTD

A.C.N. 000 590 036

7 Campbell Street Artarmon NSW 2064 P.O. Box 113, Artarmon NSW 1570 Telephone: 02 9436 0259 Facsimile: 02 9438 1882 Email: barpaint@bigpond.com

153.9 - 341.8 mg/L LC50 96 h Lepomis macrochirus static 2-Ethylhexyl acrylate 23 mg/L LC50 48 h Leuciscus idus melanotus Chemical Name Crustacea Methyl Methacrylate 69 mg/L EC50 48 h Daphnia magna 2-Ethylhexyl acrylate 17.45 mg/L EC50 48 h Daphnia magna Chemical Name Algae/aquatic plants Methyl Methacrylate 170 mg/L EC50 96 h Pseudokirchneriella subcapitata 2-Ethylhexyl acrylate 47 mg/L EC50 96 h Desmodesmus subspicatus 44 mg/L EC50 72 h Desmodesmus subspicatus Persistence and degradability No information available. Bioaccumulative potential . Chemical Name Partition coefficient Methyl Methacrylate 0.7 2-Ethylhexyl acrylate 4.64 Mobility Mobility in soil No information available. Mobility No information available. Other adverse effects Section 13: DISPOSAL CONSIDERATIONS Waste treatment methods Waste from residues/unused products Disposal should be in accordance with applicable regional, national and local laws and regulations. Since empty containers retain product residue, follow label warnings even after container is emptied. Contaminated packaging Disposal should be in accordance with applicable regional, national and local laws and regulations. Observe all label precautions until container is cleaned, reconditioned or destroyed. Refer to all federal, state and local regulations prior to disposal of container and unused contents by reuse, recycle or disposal. Section 14: TRANSPORT INFORMATION ADG Not regulated IMDG Not regulated Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code No information available IATA Not regulated Section 15: REGULATORY INFORMATION Safety, health and environmental regulations/legislation specific for the substance or mixture National regulations Australia Not classified as dangerous goods in accordance with the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG). Classified as a hazardous substance in accordance with the criteria of Safe Work Australia - Globally Harmonised System (GHS) See section 8 for national exposure control parameters Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) Not scheduled Poison Schedule Number Not scheduled International Inventories AICS - Australian Inventory of Chemical Substances Listed or exempt DSL - Canadian Domestic Substances List Listed or exempt IECSC - China Inventory of Existing Chemical Substances No information available EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of

Product Name: 213 WHITE Version 1.0 Page 6 of 7 Issued: 13/02/2019

BARHAM MANUFACTURING PTY LTD

A.C.N. 000 590 036

7 Campbell Street Artarmon NSW 2064 P.O. Box 113, Artarmon NSW 1570 Telephone: 02 9436 0259 Facsimile: 02 9438 1882 Email: barpaint@bigpond.com

Notified Chemical Substances No information available ENCS - Japan Existing and New Chemical Substances No information available KECL - Korean Existing and Evaluated Chemical Substances Listed or exempt NZIoC - New Zealand Inventory of Chemicals Listed or exempt PICCS - Philippines Inventory of Chemicals and Chemical Substances No information available CICR - Turkey Chemical Inventory Control Regulation No information available NCSR - Taiwan National Chemical Substance Registry No information available TSCA - United States Toxic Substances Control Act Section 8(b) Inventory Listed or exempt For confirmation on the European REACh status contact the Nuplex Regional Compliance group for additional information International Regulations Ozone-depleting substances (ODS) Not applicable Persistent Organic Pollutants Not applicable Export Notification requirements Not applicable Section 16: ANY OTHER RELEVANT INFORMATION Revision Date 25-Nov-2016 Revision Note The symbol (*) in the margin of this SDS indicates that this line has been revised. Key or legend to abbreviations and acronyms used in the safety data sheet Legend Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Disclaimer This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission, inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and verification. Before using any product, read its label. End of Safety Data Sheet