Teradek COLR Duo 3D Lut 33pt Dual HD-SDI with WiFi

SKU: 53.10-0072
  • LUT Box (CDL 1D and 33-Point 3D LUTs)
  • HDMI/SDI Cross-Converter
  • Wireless Controller for Ethernet Cameras
  • Supports 10-Bit Color
  • Simultaneous HDMI and SDI Outputs
  • Integrates with Pomfort LiveGrade Pro
  • Supports Virtually Every Camera Signal
  • Compatible with Virtually All Monitors
  • Convert RAW & LOG Signals for Monitoring
  • Part of Teradek Connected Set Workflow
Regular price $2,480.00
Regular price -1% $2,495.00 Sale price $2,480.00


COLR Duo is a wireless camera control bridge and 2 channel 
LUT box, with support for 2 independent 33pt 3D LUTs. COLR Duo integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look.

Looks Mean Everything

During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.

COLR in a hand
Colr with laptop running Pomfort livegrade

Works with Pomfort LiveGrade

COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.

Monitor Calibration with SpectraCal

Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.

multiple monitors that are compatible with COLR
COLR on Set

Connected Set

With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.

Technical Specifications

Video -

Video Inputs

  • 1 x SD/HD/3G-SDI (75 Ohm BNC)

Video Outputs

  • 2 x SD/HD/3G-SDI (75 Ohm BNC)

Color Sampling

  • SDI Input/Output: 10-bit YCrCb 4:2:2

Supported Input Resolutions -

Supported Resolutions

  • 1080p 23.98/24/25/29.97/30/50/59.94
  • 1080i 50/59.94/60
  • 1080PsF 23.98/24/25
  • 720p 50/59.94/60
  • 480i59.94, 576i50

Video Processing -

Test Pattern Generator Support

  • None

Video Format Conversion Support

  • None

Color Correction

  • CDL/1024 1D LUT (supports 10-bit color)
  • 33x33x33 3D LUT (supports 10-bit color)
  • Supports 2 Video Outputs with 2 independent LUT Pipelines each

Protocol Support -

Network Protocols


Software Or Platform Integration

  • Pomfort LiveGrade, SpectraCal CalMAN, and more

Inputs -

Audio Input

  • Embedded SDI Audio Input

Outputs -

Audio Output

  • Embedded SDI Audio Output

Physical -


  • 2” x 1” x 4” (50.8 x 25.4 x 101.6 mm)


  • 6oz (170.1g)

Interfaces -


  • WebUI for Configuration and Control

Configuration Interfaces

  • OLED Display with joystick navigation buttons


  • On/Off Switch

Usb Interface Functionality

  • Powered USB 2.0 host port

Network -


  • Ethernet: 10/100/1000BASE-T Gigabit


  • WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO

Rf Channel Selection

  • Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only)
  • Configurable to specific channels

Power -

Power Input

  • 2 Pin Connector Power Input

Nominal Power Consumption

  • 8W, 7W(no WiFi)

Auxilary Power Input

  • 6-28V DC
Contact Us for more Info
Video not available for this product