Teradek COLR 3D LUT. HDMI/HD-SDI Converter and live 3D LUT with WiFi
- LUT Box (CDL 1D and 33-Point 3D LUTs)
- HDMI/SDI Cross-Converter
- Wireless Controller for Ethernet Cameras
- Supports 10-Bit Color
- Simultaneous HDMI and SDI Outputs
- Integrates with Pomfort LiveGrade Pro
- Supports Virtually Every Camera Signal
- Compatible with Virtually All Monitors
- Convert RAW & LOG Signals for Monitoring
- Part of Teradek Connected Set Workflow
Overview
COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look.
Looks Mean Everything
During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.
Works with Pomfort LiveGrade
COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.
Monitor Calibration with SpectraCal
Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.
Connected Set
With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.
Technical Specifications
Video -
Video Inputs
- 1 x SD/HD/3G-SDI (75 Ohm BNC)
- 1 x HDMI Type-A receptacle
Video Outputs
- 1 x SD/HD/3G-SDI (75 Ohm BNC)
- 1 x HDMI Type-A receptacle
Color Sampling
- SDI Input/Output: 10-bit YCrCb 4:2:2
- HDMI Input: supports 8-bit RGB 4:4:4, 8-bit YCrCb 4:4:4, 12-bit YCrCb 4:2:2
- HDMI Output: 8-bit RGB 4:4:4
Supported Input Resolutions -
Supported Resolutions
- 1080p 23.98/24/25/29.97/30/50/59.94
- 1080i 50/59.94/60
- 1080PsF 23.98/24/25
- 720p 50/59.94/60
- 480p59.94, 576p50 (HDMI only)
- 480i59.94, 576i50
Video Processing -
Test Pattern Generator Support
- None
Video Format Conversion Support
- None
Color Correction
- CDL/1024 1D LUT (supports 10-bit color)
- 33x33x33 3D LUT (supports 10-bit color)
Protocol Support -
Network Protocols
- TCP/IP, UDP, HTTP, DHCP
Software Or Platform Integration
- Pomfort LiveGrade, SpectraCal CalMAN, and more
Inputs -
Audio Input
- Embedded HDMI and SDI Audio Input
Outputs -
Audio Output
- Embedded HDMI and SDI Audio Output
Physical -
Dimensions
- 2” x 1” x 4” (50.8 x 25.4 x 101.6 mm)
Weight
- 6oz (170.1g)
Interfaces -
Http
- WebUI for Configuration and Control
Configuration Interfaces
- OLED Display with joystick navigation buttons
Switches
- On/Off Switch
Usb Interface Functionality
- Powered USB 2.0 host port
Network -
Ethernet
- Ethernet: 10/100/1000BASE-T Gigabit
Wireless
- WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO
Rf Channel Selection
- Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only)
- Configurable to specific channels
Power -
Power Input
- 2 Pin Connector Power Input
Nominal Power Consumption
- 8W, 7W(no WiFi)
Auxilary Power Input
- 6-28V DC